CJ7 NV4500 transmission mount
Submitted by Jesse_at_TLT on September 9th, 2007
I designed this transmission mount to work with an AFW replacment CJ7 frame, but the mounting dimensions should work for stock frames too. This mount will tuck an NV4500 transmission up as high as physically possible without a body lift. A larger-than-normal access hole will have to be cut in the transmission tunnel, but that should be the extent of the modifications necessary. The only other thing to note is that I put this engine behind a Mopar 360 crate engine, which I made custom engine mounts for.
|cj7-nv4500-transmission-mount.dwg||AutoCAD DWG||September 9th, 2007|